Versionshinweise - A4400 VA4 Pro / Virtual Unit

Version 2.83

03.05.2023

• Preview of values in a route tree (see manual Route / Route Tree)
• Difference form last and reference values in route (see manual Route / Last and reference values)
• Angles Counting marks (with or against rotation) (see manual MENU / SETTINGS / Global Settings / Angles Counting)
• Oversampling (higher sampling frequency defined by user) (see manual Analyzer / Edit Measurement / Sampling Freq)
• New frequency ranges in octave spectrum (see manual Octave Analysis / Measurement Settings / Frequency Range
• Finishing Averaging (see manual Analyzer / Edit Measurement / Avg)
• Time axe unit in degrees (see manual Analyzer / Graph Properties / Time Axe Unit)
• External trigger edge and level removed from trigger menu and united with tacho sensor (see manual MENU / SETTINGS / Tacho / External)
• Sensors list import (see manual MENU / SETTINGS / AC Sensors / Sensors list import)
• Delta cursor value initialized according to the speed (see manual Analyzer / Graph Properties / Cursor)
• Retrig in route (see manual Route / Route Meas Mode)
• Export a record to csv (see manual Recorder / Project Menu / Export to csv)
• Report for advanced balancer (see manual Advanced Balancer / Balancer Menu / Balancing Report)

Version 2.81

03.03.2023

• Angles (phases) with or against rotation (see VA5Pro manual MENU / SETTINGS / Global Settings / Angles Counting)
• Balancing: new design and terminology (see VA5Pro manual Balancer)
• Balancing: operating speed parameter (see VA5Pro manual Balancer / Rotor Settings / Operating Speed)
• Balancing: trial weight position (see VA5Pro manual Balancer / Single Plane Balancing / Trial Run)
• Balancing: more than 255 values in averaging available
• Advanced Balancing: trial weight position (see VA5Pro manual Advanced Balancer / Balancing Procedure / Trial Runs)
• Sensor's name added to csv export (see VA5Pro manual Analyzer / Meas Menu / Export to csv)
• Canceled restrictions of highest sampling frequency (see VA5Pro  manual Analyzer / Edit Measurement / Band fmax)

Version 2.80

09.06.2022

• Frf format (see manual Analyzer / Graph Properties / Frf Format)
• Flat top window (see manual Analyzer / Edit Measurement / Window)
• The lin / log / dB choice for overall value (see manual Analyzer / Graph Properties / Axe y)
• MCSA: thd shown in table (see manual MCSA / MCSA Screen / Frequency table and thd)
• Continual saving in Route (see DDS manual)

Version 2.79

16.02.2022

• New runup trigger mode - asap all (see manual Global properties / Trigger Settings)
• The user entered frequency in amp+phase measurement (see manual The Analyzer mode / amp+phase measurement)
• Editable basic meas list (see manual The Analyzer mode / New Meas Creation / New Basic)
• Notes in csv header (see manual The Analyzer mode / CSV file description)
• Polar graph in balancer (see manual The Balancer / Single Plane Balancing / Run 1)</li>

Version 2.78

26.07.2021

• 16 bit wav encoding (see manual Global Properties / Global Settings / Wav Encoding)
• Limits multipliers (enables to increase or decrease limits) and Acc fmin in FASIT (see manual The FASIT / Setup)
• Adash limits enabled for velocity measurement with fmin lower than 10 Hz (see manual The Analyzer mode / Next meas functions / Limits / Adash Limits)
• Adash limits enabled for acceleration measurement with fmin higher than 500 Hz (see manual The Analyzer mode / Next meas functions / Limits / Adash Limits)

Version 2.76

19.05.2021

• Limit values for static measurements (see manual Analyzer / Meas Menu / Limits)
• New measurement type - complex Smax (see manual Analyzer / Complex Smax)
• Minimum and Maximum values during averaging (see manual Analyzer / Edit Measurement / Avg)
• ADS: changing channel without losing readings (see manual ADS / ADS Settings / Measurement Definition)

Version 2.75

02.02.2021

• Runup minimum and maximum speed (see manual Global properties / Trigger Settings)
• Negative Averaging (see manual Global properties / Trigger Settings / Negative Averaging)
• Negative Averaging in Bump Test (see manual Bump Test / Settings / Negative Averaging)
• Balancer: circumferential distance of balancing mass (see manual Balancer / Single plane balancing / RUN2 - the RESULT Screen)
• Route status symbols like VA3 (✓, !, .) (see manual Route / Route Status)
• Marking of non-exported routes (see manual The Route / Route measurement)
• Battery percent in About dialog (see manual Global properties / The About...)
• Export bump test to analyzer (see manual Bump Test / Analyse)

Version 2.74

23.11.2020

• Limits in the route (see manual The Route / Limits)
• Balancer: Unbalance value displayed (see manual The Balancer / Single Plane Balancing
• Balancer: The "Remove trial" item in basic settings menu (see manual The Balancer / Basic Settings)
• ADS: Vibration scale in animation (see manual ADS / ADS Settings / Vibration Scale)
• ADS: Zoom and move using touch screen (see manual ADS / Buttons for Machine View / Zoom/Move/Rotation

Version 2.72

25.05.2020

• Adjustable order in amp+phase measurement (see manual The Analyzer mode / amp+phase measurement)
• Adjustable order in phase shift measurement (see manual The Analyzer mode / Phase shift measurement)
• Adjustable resolution in orders measurement (see manual The Analyzer mode / orders measurement)

Version 2.71

28.04.2020

• Physical unit and frequency range in bump test (see manual Bump Test / Settings)
• Graph unit for spectra (see manual The Analyzer Mode / The Analyzer buffons description / Graph Properties / Graph Unit)
• Screenshots in lossless png format instead of jpg (see manual Global Properties / Screenshot)
• Bearing fault frequencies: BSF2 instead of BSF (see manual The Analyzer Mode / The Analyzer buttons description / Graph Properties / Bearing Faults)

Version 2.70

16.12.2019

• Adjustable FASIT limits (see manual FASIT / Setup)
• Sensor's name (see manual Sensors Properties / AC Sensors)
• Spectrum value type (RMS, 0-P, P-P) defined globally (see manual Global Properties / Spectrum Settings)

Version 2.69

03.06.2019

• Export of all unexported projects at once (see manual Global Properties / Export All)
• Time signal with DC offset (gap) (see manual The Analyzer mode/Time signal measurement/Time signal with DC offset (gap)
• Using external USB drive for exports (see manual General information/Connection to the computer/VAx_DISC)

Version 2.67

07.08.2018

• New highest resolution (speed / 1024) is available for balancing and 1x ampl + phase measurement (see manual The Analyzer mode/New Meas creation/New Advanced/Resolution for details)
• New function "Auto-forward" jump to next point in route (instead of "start next" function), (see manual Global properties/Global Settings/Route Auto Forward for details)
• New "Waiting for retrig" window with more user information (see manual Global properties/Trigger Settings/RunUp Mode)
• New "Waiting for trigger" window with more user information (see manual Global properties/Trigger Settings/Trigger Source)
• Lower "Band fmin" than 10Hz is available for FASIT (see manual The FASIT/Set-up/Band fmin)
• New Zoom and Cursor controll by mouse in A4410 Virtual Unit (see manual A4400 VA4 Pro vs. A4404 SAB/A4404 SAB/Graph control by mouse)

Version 2.66

27.03.2018

• More than 255 averages enabled
• ACMT detect type RMS or PEAK (see manual The Analyzer mode/ACMT measurement)

Version 2.64

24.01.2018

• Possibility to play different channels in left and right headphone (see manual The Stethoscope / Playback Settings)
• Full spectrum (see manual The Analyzer mode / Full spectrum)
• Order full spectrum (see manual The Analyzer mode / Order full Spectrum)

Version 2.59

06.07.2017

• Export of records from data cell to Recorder (see manual The Analyzer Mode/Next Meas functions/Export to Records)
• Export of records from data cell to VA4_DISC (see manual The Analyzer Mode/Next Meas functions/Export to VA4_DISC)
• "Remove trial mass" question after trial run (see manual The Balancer/Single plane balancing/RUN 2 - the TRIAL MASS screen)
• Different number of blades fot each plane (see manual The Balancer/Balancer Settings/Basic Settings)
• Balancing mass splitting (see manual The Balancer/Single plane balancing/RUN 2 - the RESULT screen)
• Change of blades (see manual The Balancer/Single plane balancing/RUN 2 - the RESULT screen)
• Various correction mass radius for each plane (see manual The Balancer/Balancer Settings/Rotor Settings)
• Temporary records deleting (see manual The Recorder/Temporary records)

Version 2.58

16.05.2017

• Time synchro averaging for spectra (see manual The Analyzer Mode/New Meas creation/New Advanced/Averaging)
• Ampl Tacho (see manual Global Properties/Trigger Settings/Use Ampl Tacho)
• You can turn on/off orders in filtered orbit (see manual Analyzer/Filtered Orbit Measurement)

Version 2.57

23.03.2017

• Order spectrum (Analyzer/Order spectrum)
• FFT output normalization - power spectrum, power spectral density, ... (Analyzer/Graph Properties/FFT Output)
• PAS (=Phase Assigned Spectrum) as FRF result (Analyzer/New Mead Creation/New Advanced)
• "Manual Entry" parameter in DC measurement (Analyzer/DC measurement)
• A4410 installer

Version 2.56

06.01.2017

• Filtered orbit measurement (Analyzer/Filtered Orbit Measurement)
• Ultrasound measurement (Analyzer/Ultrasound)
• Circular view for time waveform (Analyzer/Graph Properties/View (time waveform)

Version 2.55

06.12.2016

• Export to wav Settings (Recorder/Editing of Record)
• Min speed (Sensors properies/Tacho)

Version 2.54

04.11.2016

• Minor fixes

Version 2.53

26.10.2016

• Ultrasound Module
• Route sensors checking (menu Global/Global Settings/Check Route Sensors)
• Cursor on spectrograph
• Tacho marks in orbit graph

Version 2.52

22.09.2016

• New notes format
• Settling Prolongation (Sensors/Settling Prolongation)
• Balancer: negative value of trial mass enabled (removing mass)
• Bumptest: integration in spectrum
• Route creation in instrument

Version 2.51

20.06.2016

• Averaging types for static values (linear, maximum, minimum, median)
• Reference spectrum drawed bellow signal

Version 2.50

03.06.2016

• Faster saving data in route

Version 2.49

26.04.2016

• New appearance of FASIT
• FASIT as meas type

Version 2.48

05.04.2016

• Variable Speed Detection
• True and Scaled detect types

Version 2.47

11.02.2016

• Appearance dialog (Global/Appearance)

Version 2.46

29.09.2015

• New skin

Version 2.45

25.08.2015

• Manualy entered speed valid for whole route

Version 2.44

20.08.2015

• Minor fixes

Version 2.43

14.08.2015

• Initialization delay shortened

Version 2.42

26.05.2015

• Minor fixes

Version 2.39

16.05.2015

• New module: ADS

Version 2.41

14.05.2015

• Global/Global Settings/Record Analysis Start
• Imperial unit in basic meas

Version 2.40

11.05.2015

• Minor fixes

Version 2.38

11.03.2015

• Minor fixes

Version 2.37

21.01.2015

• Minor fixes

Version 2.36

13.01.2015

• New data type: record
• Export of all meases in a set to csv

Version 2.35

12.12.2014

• Number of used ac channels in point list
• Channel number in meas list

Version 2.34

21.10.2014

• Export of runup trends

Version 2.33

19.09.2014

• Up to 8388608 samples is time waveform
• Up to 3276800 lines in spektrum

Version 2.32

18.09.2014

• New coherence vizualization in fresp graph
• New runup mode - time or revolution
• Export to uff - all meases in history

Version 2.29

11.07.2014

• Virtual unit: up to 4 SABs possible to connect to one PC

Version 2.27

24.04.2014

• Selectable runup trend time axe - real time, relative (Global/Runup/Trend Time Axe)
• Parameter "Trend Length" from "Global/Global Settings" removed to "Global/Runup"
• Integration enabled in octave spectrum
• Selectable y-axe in octave spectrum (linear, logaritmic, decibel)
• Total mass in balancer (Balancer/Total Mass)
• Parameter fmin is possible to set to any value greater than one even if integration used
• Ord cursor in spec graph (frequency / speed frequency)
• Voltage units allowed for g-demod
• New image in balancer: overhung rotor for 2 planes
• Serial number in virtual unit's licence file name
• Export of trend data into csv file
• Headers in csv files

Version 2.25

03.03.2014

• New detect type of wideband: AVG
• Help in instrument (Global/Help)

Version 2.24

29.01.2014

• Runup trend divided into parts with selectable length (Global/Runup)

Version 2.22

11.10.2013

• "Enter Speed" item for set: you can enter the speed before measurement
• Tacho sensor: pulses per rotation as floating point number
• "Stop if ICP Error" in global settings
• "Route START Button" in global settings: "start next" enables immediate start of measuring on next point
• "Graph Lines" in spectrum graph properties (Graph Properties): drawing spectrum methods (continuous / discrete)
• Fresp: amplitudes view ("Graph Properties/Fresp View")
• Clock on screen
• New date format - mm/dd/yyyy + time displayed with a.m./p.m.
• Project list: time of last modification displayed on status bar
• Runup trend: x-axe notes in format hh:mm:ss
• Amplitudes ratio in phase shift
• Polar graph in phase shift
• Screenshots (Global/Screenshot)

Version 2.21

09.09.2013

• Trends during measurement
• New data type: phase shift
• New type of trigger: manual sequential (same as manual but waits between averages)
• Phase in spectrum
• Dynamic factor in Balancer
• Recorder cursor in absolute time
• Envelope changed to Demod

Version 2.20

07.06.2013

• Button "Save" for settings dialogs
• Integration in orbit
• Envelope measurements: ENV fmin minimal value decreased to 5Hz (instead of 100Hz)

Version 2.19

27.05.2013

• New module: Bump Test
• Spectrum: time signal view, editing of parameters of spec windows ("Graph Properties/Spec View")
• RMS and 0P values in time signal graph
• Total value in spec graph
• Stethoscope: setupable playback speed
• Speed period view in time signal, orbit, ACMT and cepstrum (Graph Properties/Speed Period...)
• Bearing faults view in time signal, ACMT and cepstrum (Graph Properties/FTF Period...)
• Synch Table in spectrum (Graph Properties/Synch Table)

Version 2.18

25.03.2013

• Zoom spectrum

Version 2.17

15.01.2013

• Periodic cursor in ACMT
• Setupable edge for external trigger ("Global/Trigger Settings/External Trig Edge")
• Clear Last Data in set (point)

Version 2.16

03.12.2012

• Longer time waveform (up to 1M samples)
• Free memory indicator during record acquisition

Version 2.15

23.11.2012

• New data type: cepstrum
• New detect types of wideband: Crest and Kurtosis
• Sound playback during the record analysis
• Data export to uff ("Meas/Save to uff")
• Data export to wav ("Meas/Save to wav")
• Data export to csv ("Meas/Save to csv")
• Saving instrument settings as profile ("Global/Profiles")
• Tacho sensor settings replaced from "Global/Trigger Settings" to "Sensors/Tacho"
• Route: "Measurement is not completed" notification
• Bearing and ISO 10816 settings for each channel ("Sensors/AC1 - AC4")
• Menu "Sensors/All Bearings": same bearing for all channels
• Menu "Sensors/All ISO": same ISO for all channels
• Export analyzer project to runup ("Project/Export to runup")
• Export runup project to analyzer ("Project/Export to analyzer")
• Button "Find": finds item in list
• User defineable graphs colors ("Global/Global Settings/Background Color - Create")
• Balancer: remove balancing masses ("Balancer/Basic Settings/Balancing Masses")

Version 2.14

18.06.2012

• Evaluation of ISO 10816 divided to A, B, C, D
• Continuous record preview
• Remote desktop control
• New data type: octave analysis
• New data type: sound level
• New data type: equivalent sound level
• New module: octave analysis
• Trigger settings: new item Pulses per rotation

Version 2.13

26.03.2012

• Enter value of cursor position by number possible ("Graph Properties/Cursor Position")
• Orda and aps view in RMS, 0P, PP ("Graph Properties/Detect Type")
• ICP channels powered permanently, shorter measurement initialization
• Balancer: balancing vector in balancing protocol
• Peak hold averaging
• Record preview during analysis
• FASIT: ISO 10816
• Graph wideband: ISO 10816 settings and limits displayed if used
• Envelope measurements: ENV fmax minimal value decreased to 200Hz (instead of 1600Hz)
• Statistics of static trends ("Graph Properties/Statistics Table")

Version 2.12

06.02.2012

• Speed control replaced by Trigger control
• Balancer: new settings dialogs
• Balancer: recomended trial calculation
• FASIT: new settings dialog
• Lubri: new settings dialog
• FASIT: harmonics displayed as triangles bellow axe

Version 2.11

05.01.2012

• Virtual unit

Version 2.09

28.11.2011

• Centerline values A,B,X,Y displayed together
• DC gap channel in ac channel settings + orbit with gaps ("Sensors/DC gap channel")

Version 2.08

09.11.2011

• Spec cascade: first in front or last in front view ("Graph Properties/Order Z")
• New mode: Lubri
• Selectable record analysis speed: fast or real time ("Global Settings/Record analysis speed")

Version 2.07

30.09.2011

• New mode: FASIT
• Balancer: advisor removed
• Balancer: keep trial in two planes possible

Version 2.06

10.08.2011

• Time cursor in orbit
• VA4_DISC check during startup
• Export of records to WAV ("Project/Export to WAV")
• Selectable range of phase -180°,180° or 0°,360° ("Global Settings/Phase range")
• Bearing database + bearing faults view in spec ("Global/Bearing Settings") + ("Graph Properties/Bearing Faults")

Version 2.05

28.06.2011

• New mode: stethoscope

Version 2.03

16.05.2011

• Temporary change settings of sensors in records ("Sensors")

Version 2.02

22.04.2011

• Graphs with axes and grids
• Graphs alignment ("Global Settings/Align Graphs")
• New cursor types: harmonic, periodic, delta, sideband ("Graph Properties/Cursor")
• Orda trends
• Export of records ("Project/Export")
• Text notices ("Project/Notices")
• ISO 10816 alarms ("Global/ISO Machine Settings")
• Spec peak list ("Graph Properties/Peak List")
• Spec view in RMS, 0P, PP ("Graph Properties/Detect Type")
• Fresp: time signal view, editing of parameters of spec windows ("Graph Properties/Fresp View")
• Cursor movement linear or maxs ("Global Settings/Cursor Type")
• Background colors of graphs ("Global Settings/Background Color")

Version 2.01

23.02.2011

• First release